© 2008 Tony Bartle Ltd
* full retention separators
* bypass separators
* petroleum forecourt products
* water recycling products
* drainage solutions
* manhole covers
* pollution control products
* grease traps
* water storage tanks
* bespoke design service
Telephone
UK: 01909 725187
Europe: 0044 1909 725187 sales@tonybartle.com
To discuss your needs, please complete the enquiry form on our contact page, or telephone:
The Euroceptor Bypass Separator was designed to comply with the requirements of BSEN858 and appears on the Environment Agency list of compliant products for PPG3.
The carefully designed and constructed system of pipes, weirs and filters, in the Euroceptor, allows the first 10% of any rain storm to enter the main separation chamber where any hydrocarbon or sediment is separated and retained, whilst the clean water is allowed to pass through without restriction.
Any flow of more than the first 10%, deemed to be ‘clean’, is allowed to bypass the main chamber and pass through to the downstream drainage system unhindered.
It is designed specifically for use in large impermeable areas such as car parks, truck parks or airport aprons, where there is no storage or transfer of hydrocarbons and therefore unlikely to be the possibility of significant spillage of pollutants. For areas where there is the storage of, or unloading of, large volumes of hydrocarbon or other possible pollutants, Full Retention Separators such as the SUPERCEPTOR should be considered.
The EuroceptorTM Bypass Separator
UK 0044 (0) 971 284 3950 or Europe 0033 (0) 498 05 23 83
A full range of ‘standard’ units are available both with and without separate integral
silt separation -
For Bypass Separator sizing chart click here